Agricultural Gearbox
The agricultural gearbox is the primary mechanical component of the kinematic chain of agricultural machines. It is normally powered by the tractor power take-off via the PTO shaft and the gearbox drives. The operating torque may also be transmitted to the gearbox by hydraulic motors or belt pulleys, in addition to chain gears.
Agricultural gearboxes will have one input shaft and at least one particular output shaft. If these shafts sit at 90° to one another, the gearbox can be an ORTHOGONAL ANGLE gearbox or even more generally called a right-position gearbox.

rotary tiller gearbox can be adopted middle equipment transmission system, mounted with the tractor of 12-80HP. Tractor wheel tracks are totally covered after tillage as the functioning width is a lot wider. The product quality is reliable and the functionality is well. So that it can be utilized on dry and paddy field. It could decrease the time, laboring, and price, etc. during operation

Increasers and Reducers
When the gearboxes have the two gears with different amounts of teeth.
The gearbox is a reducer when the driving gear, i.electronic. the main one with the input shaft, has the fewer number of teeth (pinion), thus the output shaft rotates slower compared to the input shaft.
It is named an increaser when the insight shaft is mounted on the gear with the larger amount of teeth (crown), hence the output shaft rotates faster than the input shaft.
Right-angle gearboxes, distributors or rotational reverse gearboxes
When the gearboxes have gears with the same number of the teeth.
The gearbox is known as right-angle when it only has two shafts (input and output),
whereas it is called a distributor whenever there are at least two output shafts.
It is called a rotational reverse gearbox and parallel offset in the versions with parallel shafts with two gearboxes.

Speed change
in addition to the main pair of gears and relevant shafts, the gearboxes could also have other gears with a different quantity of teeth. The gear shift of the primary pair of gears with the secondary ones enables different speeds. The manual change of the secondary equipment pair with gears with different number of teeth allows modifications to the output rotation speed.
CMR GROUP is able to design and produce also agricultural machinery applications.

Click on this link to learn why you require gearbox for agricultural machinery.