Materials Managing Electrical power UNIT 2
This power unit capabilities power up gravity down circuit. Activate the commence solenoid to start out the motor to lift the machine. The lowing movement is activated by the solenoid valve together with the reducing velocity managed through the strain compensated movement manage valve. Items of this series can be extensively used in the sector of logistic units for instance fork lift, mini lift table, and so on.
1. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean every one of the hydraulic parts concerned just before mounting the energy unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst,which need to also be clean and absolutely free of impurities, N46 hydraulic oil is advisable .
4. Oil shifting is required following the first one hundred operation hrs,afterwards when each and every 3000 hours.
five. The electrical power unit must be mounted horizontally.
Materials Managing Energy UNIT one
This power unit is designed for your fork lift sector, consisting of really efficient gear pump, DC motor, manual raise and reduced valve, tank, ect. The up and down motion are controlled by the lever with the manual release valve, that is equipped with an electric switch to activate the motor. The lowing velocity is controlled by the pressure compensated flow handle valve.
one. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean the many hydraulic components concerned before set up of the energy unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which ought to also be clean and no cost of impurities, N46 hydraulic oil is proposed .
4. Oil transforming is needed following the initial a hundred operation hours, afterwards when each and every 3000 hours.
5. The energy unit shown is created to be mounted horizontally.