January 4, 2021

1.A connecting hyperlink of an O-ring Chain for basic application is pre-coated with grease with the pins. Prior to connection, confirm the grease to the surfaces of pins, and when the level of grease is smaller, apply grease with bare hands. (If gloves are utilized, the grease are going to be absorbed by the gloves.)
Illustration: Once the connecting hyperlink (I) of an O-ring chain for general application is
shipped, O-rings are fitted at the roots of the pins. In the event the O-rings come loose as a result of vibration all through transport, refit the O-rings in towards the roots with the pins.
In this instance, be sure you return the grease collected on the roots of the pins towards the central surfaces with the pins, far more at portion A than at portions B proven in the above illustration. (Portions A is worn on account of sliding with all the bushings.)
2.The chain might be most quickly linked to the teeth of a sprocket. Engage the backlinks at each ends in the chain with all the sprocket teeth and fit connecting pins. If the sprocket may be moved, the chain may also be connected on the loosened side.
3. Connecting process
one.Confirm that O-rings are connected to the roots of the pins.
two.In the event the quantity of grease utilized within the connecting pins is tiny, coat the pins with grease on the central portions.
three.Insert the connecting pins into the bushings on the inner links at both ends.
four.Verify the grease is utilized to your complete encounter from the O-ring, and match the O-ring onto the connecting pins.
5.Insert the connecting pins in to the connecting plate and although pressing the connecting plate, set up the spring clip. Confirm irrespective of whether the head (the finish with no split) of your spring clip is turned from the feeding direction in the chain. (See the next illustration.)
six.You’ll want to confirm that the spring clip is securely fitted inside the clip grooves of your connecting pins.
This completes jointing of your connecting hyperlink. Note that grease to the surfaces of connecting pins and O-rings can be removed during set up operate. In this instance, re-grease employing the grease about the surface in the base chain or the grease while in the polyethylene bag through which the connecting hyperlink was contained.