Product Description
| AC Gear Motor | |||||||
| 4 | RK | 25 | R | C | C | F | G10 |
| Outer Diameter | Motor Type | Power Capacity | Speed Motor | Votalge | Output Shaft Shape | Accessories | Derived Code |
| 2 – 60mm 3 – 70mm 4 – 80mm 5 – 90mm 6 – 100mm |
IK – Induction RK – Reversible TK – Torque |
6 – 6W 15 – 15W 40 – 40W 60 – 60W 90 – 90W 120 – 120W 140 – 140W 180 – 180W 200 – 200W 250 – 250W |
R | A -1 Phase 110V C – 1 Phase 220V C2 – 1 Phase 110V/220V S – 3 Phase 220V S2 – 3 Phase 220V/380V S3 – 3 Phase 380V S4 – 3 Phase 440V SS3 – 3 Phase 220V/380V |
A – Round Shaft C – Toothed Shaft |
T/P – Thermally Protected F – Fan M – Electro-manetic Z – Damping |
Dimension Shaft Length |
| AC Gearhead | |||||
| 4 | GN | 60 | K | G12 | T |
| Outer Diameter | Motor Shaft Shape | Gear Ratio | Bearing Model | Output Shaft Diameter | Installation Method |
| 2 – 60mm 3 – 70mm 4 – 80mm 5 – 90mm 6 – 104mm |
GN – Bevel Gear Shaft GU – Bevel Gear Shaft GS – Strengthen T-shaped installation GZ – Right-angle gearbox GM – Intermediate gearbox |
60 – 1:60 | K – Standard Rolling Bearings RT – Right Angle RC – Right Angle Hollow |
G12 – Ф12mm | L – Screw Hole T – Through Hole |
| Specifications of Motor | |||||||||||||||||||
| Motor Type | Motor Model No. | Description | Rating | Start Condenser | Gear Model No. | ||||||||||||||
| Cylindncal Output Shaft |
Pinion Cut Output Shaft |
Force | Peripheral Wave No. | Valtage | Current | Start Turning Moment | Turning Moment | Revolving No. | Capacity | Resistance Voltage | Pairing Bearing | Middle Gear | |||||||
| ( W ) | ( Hz ) | ( V ) | ( A ) | ( gcm ) | ( gcm ) | ( rpm ) | ( uF ) | ( V ) | |||||||||||
| Rerersible Motor |
4RK25A-A | 4RK25GN-A | 25 | 50 | 110 | 0.60 | 1950 | 1950 | 1250 | 8 | 250 | 4GN-K | 4GN10X | ||||||
| 60 | 110 | 0.55 | 1650 | 1620 | 1500 | 7 | |||||||||||||
| 4RK25A-C | 4RK25GN-C | 50 | 220 | 0.30 | 1950 | 1950 | 1250 | 2 | 500 | 4GN-K | 4GN10X | ||||||||
| 60 | 220 | 0.27 | 1650 | 1620 | 1500 | 1.8 | |||||||||||||
| 4RK30A-A | 4RK30GN-A | 30 | 50 | 110 | 0.70 | 2400 | 2350 | 1250 | 10 | 250 | 4GN-K | 4GN10X | |||||||
| 60 | 110 | 0.65 | 1950 | 1950 | 1500 | 8 | |||||||||||||
| 4RK30A-C | 4RK30GN-C | 50 | 220 | 0.35 | 2400 | 2350 | 1250 | 2.5 | 500 | 4GN-K | 4GN10X | ||||||||
| 60 | 220 | 0.32 | 1950 | 1950 | 1500 | 2 | |||||||||||||
| 4RK40A-A | 4RK40GN-A | 40 | 50 | 110 | 0.80 | 3250 | 3250 | 1250 | 16 | 250 | 4GN-K | 4GN10X | |||||||
| 60 | 110 | 0.75 | 3600 | 2600 | 1500 | 14 | |||||||||||||
| 4RK40A-C | 4RK40GN-C | 50 | 220 | 0.40 | 3250 | 3250 | 1250 | 4 | 500 | 4GN-K | 4GN10X | ||||||||
| 60 | 220 | 0.38 | 2600 | 2600 | 1500 | 3.5 | |||||||||||||
| Induction Motor |
4IK25A-A | 4IK25GN-A | 25 | 50 | 110 | 0.55 | 1650 | 1950 | 1250 | 7 | 250 | 4GN-K | 4GN10X | ||||||
| 60 | 110 | 0.50 | 1380 | 1620 | 1500 | 6 | |||||||||||||
| 4IK25A-C | 4IK25GN-C | 50 | 220 | 0.28 | 1650 | 1950 | 1250 | 1.8 | 500 | 4GN-K | 4GN10X | ||||||||
| 60 | 220 | 0.25 | 1350 | 1620 | 1500 | 1.5 | |||||||||||||
| 4IK30A-A | 4IK30GN-A | 30 | 50 | 110 | 0.65 | 2050 | 2350 | 1250 | 10 | 250 | 4GN-K | 4GN10X | |||||||
| 60 | 110 | 0.60 | 1750 | 1950 | 1500 | 8 | |||||||||||||
| 4IK30A-C | 4IK30GN-C | 50 | 220 | 0.33 | 2050 | 2350 | 1250 | 2.2 | 500 | 4GN-K | 4GN10X | ||||||||
| 60 | 220 | 0.30 | 1750 | 1950 | 1500 | 2 | |||||||||||||
| External Dimension | |||||||||||||||||||
| Type | Reduction Ratio | L1(mm) | L2(mm) | L3(mm) | |||||||||||||||
| 4IK(RK)25A(GN) | 1:3 ~ 1:20 | 86 | 32 | 118 | |||||||||||||||
| 4IK(RK)30A(GN) | 86 | 32 | 118 | ||||||||||||||||
| 4IK(RK)40A(GN) | 101 | 32 | 133 | ||||||||||||||||
| 4IK(RK)25A(GN) | 1:25 ~ 1:180 | 86 | 44 | 130 | |||||||||||||||
| 4IK(RK)30A(GN) | 86 | 44 | 130 | ||||||||||||||||
| 4IK(RK)40A(GN) | 101 | 44 | 145 | ||||||||||||||||
| Gear Head-Torque Table (kg.cm) | |||||||||||||||||||
| ( kg.cm x 9.8 ÷ 100 ) = N.m | |||||||||||||||||||
| r/min | 500 | 300 | 200 | 150 | 120 | 100 | 75 | 60 | 50 | 30 | 20 | 15 | 10 | 7.5 | 6 | 5 | 3 | ||
| Gear Redcution Ratio | 50Hz | 3 | 5 | 7.5 | 10 | 12.5 | 15 | 20 | 25 | 30 | 50 | 75 | 100 | 150 | 200 | 250 | 300 | 500 | |
| 60Hz | 3.6 | 6 | 9 | 15 | 18 | 30 | 36 | 60 | 90 | 120 | 180 | 300 | 360 | 600 | |||||
| Permissible Load | 25W | kg.cm | 4 | 6.7 | 10 | 13.3 | 16 | 20 | 26.7 | 32 | 39 | 65 | 80 | 80 | 80 | 80 | 80 | 80 | 80 |
| 30W | kg.cm | 4.8 | 8 | 12 | 16 | 20 | 24 | 32 | 38 | 45 | 76 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | |
| 40W | kg.cm | 6.7 | 11 | 16 | 21.3 | 28 | 33 | 42 | 54 | 65 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | |
| Note: Speed figures are based on synchronous speed, the actual output speed, under rated torque conditions, is about 10~20% less than synchronous speed. Grey background indicates: output shaft of geared motor rotates in the same direction as output shaft of motor White background indicates: rotation in the opposite direction |
|||||||||||||||||||
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Industrial |
|---|---|
| Speed: | Constant Speed |
| Number of Stator: | Single-Phase |
| Function: | Driving, Control |
| Casing Protection: | Protection Type |
| Number of Poles: | 4 |
| Customization: |
Available
|
|
|---|
How is the efficiency of a gear motor measured, and what factors can affect it?
The efficiency of a gear motor is a measure of how effectively it converts electrical input power into mechanical output power. It indicates the motor’s ability to minimize losses and maximize its energy conversion efficiency. The efficiency of a gear motor is typically measured using specific methods, and several factors can influence it. Here’s a detailed explanation:
Measuring Efficiency:
The efficiency of a gear motor is commonly measured by comparing the mechanical output power (Pout) to the electrical input power (Pin). The formula to calculate efficiency is:
Efficiency = (Pout / Pin) * 100%
The mechanical output power can be determined by measuring the torque (T) produced by the motor and the rotational speed (ω) at which it operates. The formula for mechanical power is:
Pout = T * ω
The electrical input power can be measured by monitoring the current (I) and voltage (V) supplied to the motor. The formula for electrical power is:
Pin = V * I
By substituting these values into the efficiency formula, the efficiency of the gear motor can be calculated as a percentage.
Factors Affecting Efficiency:
Several factors can influence the efficiency of a gear motor. Here are some notable factors:
- Friction and Mechanical Losses: Friction between moving parts, such as gears and bearings, can result in mechanical losses and reduce the overall efficiency of the gear motor. Minimizing friction through proper lubrication, high-quality components, and efficient design can help improve efficiency.
- Gearing Efficiency: The design and quality of the gears used in the gear motor can impact its efficiency. Gear trains can introduce mechanical losses due to gear meshing, misalignment, or backlash. Using well-designed gears with proper tooth profiles and minimizing gear train losses can improve efficiency.
- Motor Type and Construction: Different types of motors (e.g., brushed DC, brushless DC, AC induction) have varying efficiency characteristics. Motor construction, such as the quality of magnetic materials, winding resistance, and rotor design, can also affect efficiency. Choosing motors with higher efficiency ratings can improve overall gear motor efficiency.
- Electrical Losses: Electrical losses, such as resistive losses in motor windings or in the motor drive circuitry, can reduce efficiency. Minimizing resistance, optimizing motor drive electronics, and using efficient control algorithms can help mitigate electrical losses.
- Load Conditions: The operating conditions and load characteristics placed on the gear motor can impact its efficiency. Heavy loads, high speeds, or frequent acceleration and deceleration can increase losses and reduce efficiency. Matching the gear motor’s specifications to the application requirements and optimizing load conditions can improve efficiency.
- Temperature: Elevated temperatures can significantly affect the efficiency of a gear motor. Excessive heat can increase resistive losses, reduce lubrication effectiveness, and affect the magnetic properties of motor components. Proper cooling and thermal management techniques are essential to maintain optimal efficiency.
By considering these factors and implementing measures to minimize losses and optimize performance, the efficiency of a gear motor can be enhanced. Manufacturers often provide efficiency specifications for gear motors, allowing users to select motors that best meet their efficiency requirements for specific applications.
Are there environmental benefits to using gear motors in certain applications?
Yes, there are several environmental benefits associated with the use of gear motors in certain applications. Gear motors offer advantages that can contribute to increased energy efficiency, reduced resource consumption, and lower environmental impact. Here’s a detailed explanation of the environmental benefits of using gear motors:
1. Energy Efficiency:
Gear motors can improve energy efficiency in various ways:
- Torque Conversion: Gear reduction allows gear motors to deliver higher torque output while operating at lower speeds. This enables the motor to perform tasks that require high torque, such as lifting heavy loads or driving machinery with high inertia, more efficiently. By matching the motor’s power characteristics to the load requirements, gear motors can operate closer to their peak efficiency, minimizing energy waste.
- Controlled Speed: Gear reduction provides finer control over the motor’s rotational speed. This allows for more precise speed regulation, reducing the likelihood of energy overconsumption and optimizing energy usage.
2. Reduced Resource Consumption:
The use of gear motors can lead to reduced resource consumption and environmental impact:
- Smaller Motor Size: Gear reduction allows gear motors to deliver higher torque with smaller, more compact motors. This reduction in motor size translates to reduced material and resource requirements during manufacturing. It also enables the use of smaller and lighter equipment, which can contribute to energy savings during operation and transportation.
- Extended Motor Lifespan: The gear mechanism in gear motors helps reduce the load and stress on the motor itself. By distributing the load more evenly, gear motors can help extend the lifespan of the motor, reducing the need for frequent replacements and the associated resource consumption.
3. Noise Reduction:
Gear motors can contribute to a quieter and more environmentally friendly working environment:
- Noise Dampening: Gear reduction can help reduce the noise generated by the motor. The gear mechanism acts as a noise dampener, absorbing and dispersing vibrations and reducing overall noise emission. This is particularly beneficial in applications where noise reduction is important, such as residential areas, offices, or noise-sensitive environments.
4. Precision and Control:
Gear motors offer enhanced precision and control, which can lead to environmental benefits:
- Precise Positioning: Gear motors, especially stepper motors and servo motors, provide precise positioning capabilities. This accuracy allows for more efficient use of resources, minimizing waste and optimizing the performance of machinery or systems.
- Optimized Control: Gear motors enable precise control over speed, torque, and movement. This control allows for better optimization of processes, reducing energy consumption and minimizing unnecessary wear and tear on equipment.
In summary, using gear motors in certain applications can have significant environmental benefits. Gear motors offer improved energy efficiency, reduced resource consumption, noise reduction, and enhanced precision and control. These advantages contribute to lower energy consumption, reduced environmental impact, and a more sustainable approach to power transmission and control. When selecting motor systems for specific applications, considering the environmental benefits of gear motors can help promote energy efficiency and sustainability.
In which industries are gear motors commonly used, and what are their primary applications?
Gear motors find widespread use in various industries due to their versatility, reliability, and ability to provide controlled mechanical power. They are employed in a wide range of applications that require precise power transmission and speed control. Here’s a detailed explanation of the industries where gear motors are commonly used and their primary applications:
1. Robotics and Automation:
Gear motors play a crucial role in robotics and automation industries. They are used in robotic arms, conveyor systems, automated assembly lines, and other robotic applications. Gear motors provide the required torque, speed control, and directional control necessary for the precise movements and operations of robots. They enable accurate positioning, gripping, and manipulation tasks in industrial and commercial automation settings.
2. Automotive Industry:
The automotive industry extensively utilizes gear motors in various applications. They are used in power windows, windshield wipers, HVAC systems, seat adjustment mechanisms, and many other automotive components. Gear motors provide the necessary torque and speed control for these systems, enabling smooth and efficient operation. Additionally, gear motors are also utilized in electric and hybrid vehicles for powertrain applications.
3. Manufacturing and Machinery:
Gear motors find wide application in the manufacturing and machinery sector. They are used in conveyor belts, packaging equipment, material handling systems, industrial mixers, and other machinery. Gear motors provide reliable power transmission, precise speed control, and torque amplification, ensuring efficient and synchronized operation of various manufacturing processes and machinery.
4. HVAC and Building Systems:
In heating, ventilation, and air conditioning (HVAC) systems, gear motors are commonly used in damper actuators, control valves, and fan systems. They enable precise control of airflow, temperature, and pressure, contributing to energy efficiency and comfort in buildings. Gear motors also find applications in automatic doors, blinds, and gate systems, providing reliable and controlled movement.
5. Marine and Offshore Industry:
Gear motors are extensively used in the marine and offshore industry, particularly in propulsion systems, winches, and cranes. They provide the required torque and speed control for various marine operations, including steering, anchor handling, cargo handling, and positioning equipment. Gear motors in marine applications are designed to withstand harsh environments and provide reliable performance under demanding conditions.
6. Renewable Energy Systems:
The renewable energy sector, including wind turbines and solar tracking systems, relies on gear motors for efficient power generation. Gear motors are used to adjust the rotor angle and position in wind turbines, optimizing their performance in different wind conditions. In solar tracking systems, gear motors enable the precise movement and alignment of solar panels to maximize sunlight capture and energy production.
7. Medical and Healthcare:
Gear motors have applications in the medical and healthcare industry, including in medical equipment, laboratory devices, and patient care systems. They are used in devices such as infusion pumps, ventilators, surgical robots, and diagnostic equipment. Gear motors provide precise control and smooth operation, ensuring accurate dosing, controlled movements, and reliable functionality in critical medical applications.
These are just a few examples of the industries where gear motors are commonly used. Their versatility and ability to provide controlled mechanical power make them indispensable in numerous applications requiring torque amplification, speed control, directional control, and load distribution. The reliable and efficient power transmission offered by gear motors contributes to the smooth and precise operation of machinery and systems in various industries.
editor by CX 2024-04-13
by
Tags:
Leave a Reply